April 12, 2021
Industrial oven manufacturers tell you that vacuum oven is designed to dry heat sensitive, easy to synthesize and easy to oxidize substances, can be filled with inert gas, especially some complex components of the goods can also stop drying quickly. Cuboid studio, so that the effective volume to z large, microcomputer temperature controller, accurate temperature control; toughened, bulletproof double-layer glass door inspection studio objects, know the palm. Box closed and tight can be adjusted, integral molding silicone rubber door seal ring to ensure high vacuum in the box.
The vacuum oven studio is made of stainless steel plate (or wire drawing plate) to ensure the durability of the product. Storage, heating, testing and drying are stopped without oxygen or in an atmosphere filled with inert gas, so they are not oxidized.
The short heating time is more than 50% less than that of the traditional vacuum drying oven. Because the vacuum oven is provided with heat energy by electric power, and the wet articles will conduct electricity, it is advisable to be careful not to have the phenomenon of leakage in use, so the ordinary oven should be grounded to ensure safety. If there is no ground wire in the vacuum high temperature baking box, make sure that there is no leakage in the oven. If there is still leakage, it should be stopped immediately.
The temperature of the thermometer in the vacuum oven is the temperature generated by absorbing thermal radiation. The amount of thermal radiation absorbed is closely related to the rough level of thermometer material and the absorption, refraction and transmission ability of infrared radiation. At this time, the thermometer reading can only represent the temperature of the thermometer itself after absorbing infrared radiation, vacuum high temperature baking box, but not the practical temperature after absorbing heat radiation from other different materials and different external states.
