Liyi Mini Climate Test Change Temperature Chamber Environmental Chambers
This temperature humidity test chamber is mainly used for products in accordance with the requirements of national standard or user-defined requirements, at low temperature, high temperature, humidity and temperature cycling conditions, physical and other relevant characteristics of the product environmental simulation test, after tested by detecting to judge the performance of the product, it is still able to meet predetermined requirements in order for the product design, improvement, identification and factory inspection use.
|Volume (V)||80 L||150L||225L||408L||800L|
Temp and Hum
A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C
|Deviation||±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)|
|Material||Inner Wall||#SUS 304 Stainless steel|
|Outer Skin||#SUS 304 Stainless steel|
High temperature resistant,
high chlorine acid b vinegar foam insulation materials
|Wind Cycling Way||Centrifugal fan-broadband type forced air circulation|
|Refrigeration Way||Single stage compression refrigeration|
|Refrigerants||R4O4A USA DuPont environmental protection refrigerant(R23+R404)|
|Condensing Way||Air-cooled or water-cooled|
|Heater||Nickel chrome heating wire heater|
|Humidifier||Semi-closed steam and wet|
|Water Supplying Way||Automatic cycling water supply|
1 Observe window(double-deck cavity toughened glass),
1 50mm test hole in the left,
1 PL inner chamber lamp,
1 bag of wet and dry bulb,
1 power line.
Non- fuse-switch(compressor overload,
refrigerant high low voltage,
over-humidity and temperature protection,
Protection switch,fuse stoppage warning system
During the whole business process, we offer Consultative Selling service.
1)Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.
3)Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4)Installation and after sale service:
Defines installing those products in the field and providing after-sales support.