LIYI Heating And Cooling Thermal Shock Test Chamber Hanging Basket -65 To +185 Degree
Machine introduction:
-65 to +185 Degree Hanging Basket Heating and Cooling Thermal Shock Machine Thermal Testing Equipment is divided into two-box and three-box type, the difference is that the test method and internal structure are different, the product conforms to the standard: GB/T2423.1-2008 test A, GB/T2423.2-2008 test B, GB- T10592-2008, GJB150.3-198, GJB360A-96 Method
The hot and cold impact test box is a necessary test equipment for metal, plastics, rubber, electronics and other materials industries. It is used to test the structure of materials or composite materials, and can tolerance it under extremely high temperature and extremely low temperature in a continuous environment.
The chemical change or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time.
Standards:
● GB-2423．1-89(IEC68-2-1)Test Mode A:Low Temperature Test
● GB-2423．2-89(IEC68-2-2)Test Mode B:High Temperature Test
● GJB360．8-87(MIL-STD．202F)High Temperature Life Test
● GBJl50．3(MIL-STD-810D)High Temperature Test
● GJBl50．4(MIL-STD-810D)Low Temperature Test
Specifications:
|
1. High Temperature Cabinet: |
+60℃～+200℃ |
|
2. Low Temperature Cabinet: |
-70℃～-10℃ |
|
3. High Temperature Thermal Shock range
|
+60℃～+180℃ |
|
4. Low Temperature Thermal Shock range |
-65℃～-10℃ |
| 5. Ramp rate |
In accordance with the IEC60068-3-5 standards Heating up rate for High Temperature Cabinet: +60℃to +200℃ non-linear 4.5℃/min no load Cooling down rate for High Temperature Cabinet: +70℃to -50℃ non-linear 3℃/min no load Ramp rate can be controlled linearly, the minimum rate is 1℃/min, the maximum can’t exceed the chamber’s ramp rate. |
| 6. Temperature unifomity | ≦±2℃ |
| 7. Temperature fluctuation | ≦±0.5℃ |
| 8. Operating mode |
a. High and low temperature thermal shock mode; b. High temperature, low temperature test can be controlled independently , when the samples are being tested in High temperature, low temperature cabinet and controlled independently , the test basket will be automatically locked. Two partitions can be put in the temperature tank, low temperature cabinet. Both high and low temperature test can be done. |
| Construction | |
| 1. Testing Cabinet Dimension | W 400× H 500 × D 400 mm |
| 2. Outer Dimension | W 860 × H 2170 × D 2000 mm (Excluding the prominent part of the chamber) |
| 3.Inner Cabinet Material | SUS304# Non Bright Stainless Steel Plate |
| 4. Outer Cabinet Material | Stainless Steel with color plastic painting |
| 5. Isolating Material | PUR + Glass Fiber |
| 6. Heater | High efficiency electric heater |
| 7. Air Circulation System |
a. Teco Motor b. Stainless Steel lengthening Axil c. Sirocco Fan |
| 8. Door | Single Door |
| 9. Testing Holes | 50mm at the top of the chamber |
| 10. Sample Holders | 2 sample holders with SUS #304 |
| 11. Test Drive way | Rack gear racking |
| 11. Door Sealing | Silicone form sealing belt |
Structure Features
Wall material:Top-grade Carbon Steel Plate,Surface electrostatic color Spray processing
Inner wall material:Stainless Steel Plate SUS304
Body insulation material:Rigid polyurethane Foam + glass fiber
Door insulation material:Rigid Polyurethane Foam + Glass fiber
