LIYI 1682 2.2KW SUS304 Lithium Battery Nail Penetration Test Equipment
1. The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
2. Lighting system is designed to observe the internal testing process;
3. Nail Penetration/Crush Velocity with controllable range of 1~40mm/s;
4. Nail Penetration/Crush Force controllable within range from 20T to 50T ,meet different standards;
5. Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge the exhaust air.
6. Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety.
|Display||PLC Touch screen display|
|Electric control||Controlled by PLC program|
|penetration mode||vertical direction|
|steel nail diameter||2mm~10mm, 20mm for option|
|Inner box material||SUS304 stainless steel, iron and fluorine melted tape attached to the box, insulated, high temperature and flame resistant, easy to clean and maintain|
|Outer box material||Cold rolled sheet baking treatment|
|Exhaust device||Located at the rear of the cabinet, exhaust fan, duct diameter 120mm, length 100mm, convenient to connect with external laboratory high-power exhaust fan|
|Test mode||Single test|
|Observation window||tempered glass explosion-proof observation window, the size is 250*250*5mm, and with iron gauze between the glass in case of battery explosion splash and avoid to injury operator.|
|Protective device||Safety door switch, Automatic sensor door, the door closed when start to test, opened after testing finished|
|Max. Battery tested size||300*300*100mm (L*W*H)|
|Using electric||AC220V±10%, 10A 50Hz 1phase|
Guangdong LIYI Technology Co.,Ltd
|Contact Person :||Vickey Jin|
|Tel :||+86 13925868409|