LIYI Battery Impact Test Equipment Battery Weight Impact Tester With Touch Screen
Product purpose:
The test sample battery shall be placed on a plane. A rod with a diameter of 15.8 mm was placed crosswise at the center of the sample. A 9.1kg weight was dropped onto the sample from a height of 610mm. Each sample battery only needs to withstand one impact, and different samples shall be used for each test. The safety performance of the battery shall be tested by different weights and different stress areas from different heights. The test shall be carried out according to the regulations. The battery shall not ignite or explode.
According to standard:
GB 31241-2014 safety requirements for lithium ion batteries and battery packs for portable electronic products
Specifications:
| Specifications | Parameter |
| Environmental requirements for equipment use | Temperature below 45 ℃, humidity below 80% |
| Power Supply | AC220V,50/60Hz |
| source of water | nothing |
| vacuum | nothing |
| compressed air | nothing |
| Ground requirements and bearing requirements | Concrete ground, ≥ 600kg, |
| Network requirements | nothing |
| Construction requirements for smoke, dust, waste gas and wastewater treatment plant | Exhaust gas discharge port diameter: 100mm |
| Accepted Delivery Terms: | FOB, CFR, CIF, EXW, DDP |
| Accepted Payment Currency: | USD, EUR, HKD, CNY |
| Accepted Payment Type: | T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow |
| Nearest Port: | Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired |
