Liyi UV Test Chamber, Anti Radiation Test Chamber, Anti Yellowing Chamber
Anti yellowing chamber simulating the ultraviolet radiation of sunlight, the test piece is irradiated by ultraviolet ray in the machine for a period of time, the degree of resistance to yellowing or fading is observed, the grade of yellow change can be determined by gray standard ratio, and this product can also be used to eliminate the function of EPROM in the electronics industry.
Gray standard available for reference pollution,determine the material level of yellowing. You can also visually observe yellowing sample rate directly. It can be used as ageing tester and ovens after taking off ultraviolet lamp.
1. Use hot wind cycle to heat;
2. Use SUS #304 stainless steel as inner material;
3. Use paint-coated processing as external material.
Inner chamber size(W*D*H)
|Outer size(W*D*H)||54×34×43 cm|
|Shelves||Two layers, height can not be adjusted|
|UV light source||2 tubes, 15W|
|UV light wavelength||Max 265nm|
|UV light irradiance||Max 0.3w/m²|
|Timer||0~9999min, electronic display|
|Chamber weight||12 Kg|
|Contact Person :||Vickey Jin|
|Tel :||+86 13925868409|